I bought a Milk-V Mars (4GB version) last year. Pi-like form factor and price seemed like an easy pick for dipping my toes into RISC-V development, and I paid US$49 plus shipping at the time. There’s an 8GB version too but that was out of stock when I ordered.

If I wanted to spend more I’d personally prefer to put that budget toward a higher core system (for faster compile times) before any laptop parts, as either HDMI+USB or VNC would be plenty sufficient even if I did need to work on GUI things.

Other RISC-V laptops already are cheaper and with higher performance than this would be with Framework’s shell+screen+battery, so I’m not sure what need this fills. If you intend to use the board in an alternate case without laptop parts you might as well buy an SBC instead.

This board has the StarFive JH7110 SoC. That processor has previously been in very low power single board computers like StarFive VisionFive 2 (2022) and Milk-V Mars (2023), a Raspberry Pi clone that can be bought for as low as $40. Its storage limitations (SD/eMMC rather than NVMe) show how much this isn’t meant for laptop use.

Very underpowered for a laptop too, even when considering this is intended for developers and doesn’t need to be remotely performance competitive. Consider that this has just 4 RV64GC cores, the cheapest Intel board options Framework offers are 12 cores (4P+8E), and any modern RISC-V core is far simpler with less area than even an Intel E core. These cores also lack the RISC-V vector instructions extension.

I’m not completely sure but I think they removed it at some point after the public backlash (which was 3 years ago now). For the Windows version at least, there apparently used to be an option during the installation wizard for setting whether telemetry is enabled or not. Most Linux distros never had the telemetry at all. I don’t know about Mac.

It is open source, but had some controversy. Most prominently the addition of telemetry a few years ago, which was never included in the builds managed by Debian or most other distro maintainers. They also added a Contributor License Agreement which lets the Audacity project change its own license (even to a non-foss one, though they promise they won’t) without needing to have the change approved by any individual developers.

and it’s free

This is very uncommon in the US. Most major banks (I’m not aware of any exceptions) charge a fee for each outgoing wire transfer, usually $25-$30. Bank of America, Wells Fargo, Chase, and PNC for just a few examples I’m aware of, plus every credit union that has local branches in my area. Some of those banks even add a second fee at the recipient’s side for incoming wire transfer.

They often encourage customers to rely on third party services like Zelle instead for small transfers to friends and family. Many banks’ sites/apps can also handle transfers between two accounts that both belong to the same bank for free too.

Even their earliest “uncarrier” features weren’t without issue. Making certain services (spotify, apple music, youtube, netflix, etc.) not count against subscribers’ data caps, while continuing to enforce data caps for other uses, goes against the spirit of net neutrality. This also includes throttling video streams by default to force lower quality (with opt-out on their site).

Promos like a free pizza on Tuesdays seems like a neat optional perk on the surface but their existence fundamentally mean subscription expenses on cellular network service are partially going towards things that have not even the slightest tangential connection to the service.

A standard called SystemReady exists. For the systems that actually follow its standards, you can have a single ARM OS installation image that you copy to a USB drive and can then boot through UEFI and run with no problems on an Ampere server, an NXP device, an Nvidia Jetson system, and more.

Unfortunately it’s a pretty new standard, only since 2020, and Qualcomm in particular is a major holdout who hasn’t been using it.

Just like x86, you still need the OS to have drivers for the particular device you’re installing on, but this standard at least lets you have a unified image, and many ARM vendors have been getting better about upstreaming open-source drivers in the Linux kernel.

To the contrary, I would expect the sample to skew more towards people who have a heavily customized X session and strong opinions about window managers while drastically underrepresenting average GNOME users who stick with the default Wayland session. Someone who likes their custom setup can still be waiting for a Wayland equivalent while casual Ubuntu users have been defaulted to Wayland on new non-nvidia installs since early 2021.

It is a Linux machine. Runs a Debian derivative, and it’s not like Windows or anything else that isn’t Linux/BSD can run on a RISC-V laptop.

This isn’t the first RISC-V laptop, but the significance of a RISC-V laptop existing is primarily for developers who work on software targeting RISC-V systems. The ability to run RV64 programs without emulation and to natively compile RV64 software without cross-compilers is valuable to some people. Also, China in particular sees value in having computing products that aren’t affected by sanctions; the processor in this is designed and manufactured by a Chinese company without licensing any intellectual property from US or UK.

I tried to do this a while ago with a GNOME system, setting GDM to automatically log me in, but I ended up always getting prompted for my password from gnome-keyring shortly after logging in which seemed to defeat the point. If you use GNOME, you might want to look at ArchWiki’s gnome-keyring page which describes a couple solutions to this problem (under the PAM section) which should be applicable on any systemd distro.

There’s only one case I’ve found where Wi-Fi use seems acceptable in IoT: ESPHome. It’s open-source firmware for microcontrollers that makes DIY IoT sensors and controls accessible over LAN without phoning home to whatever remote server, without trying to make anything accessible over the Internet, and without breaking in any way if the device has no route to the Internet.

I still wouldn’t call Wi-Fi use ideal even there; mesh can help in larger homes and Z-Wave/Zigbee radios tend to be more power efficient, though ESP32 isn’t exactly suited for a battery-powered device that’s expected to run 24/7 regardless.

Yes.

My home server has dropbear-initramfs installed so that after reboot I can access the LUKS decryption prompt over SSH. The one LUKS partition contains a btrfs filesystem with both rootfs and home as subvolumes. For all the other drives attached to that system, I use ZFS native encryption with a dataset that decrypts with a keyfile from that rootfs and I have backups of an encrypted copy of that keyfile.

I don’t think there’s a substantial performance impact but I’ve never bothered benchmarking.

The problem with those TV apps is DRM. All the major streaming services require that you either use a locked down platform (probably checking SafetyNet and more on Android TV) or settle for their browser UI which lacks dpad support and gets quality throttled to 1080p or lower.

Circumventing that DRM is possible, but no project at the scale of a platform like those would dare the both legal risk and support headache of making those circumventions (which are very liable to break) a core part of the OS.

Kodi (and distros using it like LibreELEC) exist for people who want a FOSS platform for using non DRM encumbered media with a TV remote interface.

Something I’ve noticed that is somewhat related but tangential to your problem: The result I’ve always gotten from using compose files is that container names and volume names get assigned names that contain a shared prefix by default. I don’t use docker and instead prefer podman but I would expect both to behave the same on this front. For example, when I have a file at nextcloud/compose.yml that looks like this:

volumes:
  nextcloud:
  db:

services:
  db:
    image: docker.io/mariadb:10.6
    ...
  app:
    image: docker.io/nextcloud
    ...

I end up with volumes named nextcloud_nextcloud and nextcloud_db, with containers named nextcloud_db and nextcloud_app, as long as neither of those services overrides this behavior by specifying a container_name. I believe this prefix probably comes from the file-level name: if there is one and the parent directory’s name otherwise.

The reasons I adjust my own compose files to be different from the image maintainer’s recommendation include: to accommodate the differences between podman and docker, avoiding conflicts between the exported listen ports, any host filesystem paths I want to mount in the container, and my own preferences. The only conflict I’ve had with other containers there is the exported port. zigbee2mqtt, nextcloud, and freshrss all suggest using port 8080 so I had to change at least two of them in order to run all three.

Likely reversing a major anti-consumer decision is nice, even if it took seven years.

Knowing that consumer protections repeatedly flip back and forth every time the executive branch switches political party, and even then only if we’re lucky, is not so reassuring. What’s stopping it from being repealed again in a few years?

I have configured custom Android kernel builds to enable more USB drivers, enable module support, and tweak various other things. For one tangible example of the result: I could plug in a USB Wi-Fi adapter and use it to simultaneously connect to another Wi-Fi network with the internal NIC while also sharing my own AP over USB. On an Android device of all things. I have also adjusted kernel builds for SBCs (like Pi clones) to get things working at all.

I have never seen any reason to configure a custom kernel for my own desktop/laptop systems. Default builds for the distros I’ve used have been fine for me; if I’m ever dissatisfied with anything it’s the version number rather than the defconfig. The RHEL/Rocky kernel omits a few features I want (like btrfs) but I’d rather stick to other distros on personal systems than tweak a distro that isn’t even meant for tweaking.

I never had problems with Debian stable, especially on headless server. But it’s not especially well-suited for brand new desktop hardware; even Ubuntu LTS and RHEL focus more on hardware enablement backports than Debian.

I’ve had a worse experience with Debian testing breaking my system with updates than Arch. Adding to that the freeze period (2012’s was the worst, lasting 11 months) makes testing feel like the worst of both worlds between rolling and standard release distros.

I recommend giving dnf the -C flag to most operations, particularly those that don’t involve downloading packages. The default behavior is often similar to pacman’s -y flag and so the metadata sync ends up slowing everything down by orders of magnitude.

I’ve long known about it. I don’t seriously use it, but I would if only my Wi-Fi router was fully supported. It’s an Asus one (that I got for free from T-Mobile a decade ago) so I installed Asuswrt-Merlin on it instead.

Following the recommendation of homelab communities, I got into OpnSense (a BSD-based firewall system for x86 hardware only) last year, still keeping my Wi-Fi router as a dedicated AP. In hindsight I somewhat regret that choice and probably would’ve been better off buying a new OpenWRT-compatible router and using it to handle firewall/routing/AP all in one device instead of wasting the power draw of another separate N100 system. I like having wireguard and vnstat in my router now, which Merlin didn’t offer, but I know OpenWRT has those too and I don’t have any other needs that warrant a higher-power router.

As someone who used to use Arch a decade ago: I still use pacman for devkitpro at least, and I do miss how fast its parallel downloads get, but the tool I use to manage packages is far from the most important difference between distros to me, even if you assume not needing AUR.