ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures

Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters

JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost

Probably not.

However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily

This infographic is really helpful. Stuff like this makes me relieved I use the majority of services in a browser, rather than native apps

IIRC Beehaw doesn’t federate downvotes. The OP has been pretty heavily downvoted for no valid reason

I’ve tried both on my low powered HTPC and came to the same conclusion - especially noticeable where video acceleration is concerned

Something about that channel feels “off”, don’t know what it is. Maybe all the rants and abundance of negative opinions?? Perhaps it’s the culture difference in how he communicates on camera?

The only positive videos I’ve seen are him moving to macOS, the dell laptop one, and i guess the keyboard one, the other ones seem to be mostly opinion pieces & rants. There are other channels that do a better, more balanced job of this I think

Explains why I was having issues with this in Gnome on my HTPC…

Ended up making a remote button shortcut to maximise and restore apps

I used to have only 4GB in my old Linux HTPC, didn’t take much for it to choke when using the browser. Upgraded to 16GB and no issues since

Doubt it, after reading it myself it is nowhere as calculated and artificial as ChatGPT output

It is a pretty good read though.

Not the case with ARM processors sadly, IMO they’re a bit of a mess from that perspective. Proprietary blobs for hardware, unusual kernel hacks for some devices, and no device tree support so you can’t just boot any image on any device. I think Windows for ARM encouraged some standardization in that regard, but for the most part looking at Android devices it’s still very much the wild west.

This is one of the many reasons why Raspberry Pi ARM boards remain popular for the time being, despite there being so many other cheap alternatives available: they actually keep supporting their old boards & ensure hardware on their boards works from the get-go.

There are also some rare cases where Raspberry Pi rewrite open source implementations of Broadcom’s proprietary blob drivers, in one instance for the built in CSI (optional camera)

Absolutely love the ability to share links from my android and have them open automagically on my linux HTPC. Also made a command shortcut for my laptop so I can unlock it from my android. Really versatile

I wholeheartedly agree with this tbh. Love FreeCAD for my 3D printing stuff, pretty much use it daily, however compared to something like Solidworks or AutoCAD it would be torture IMO to willingly chose FreeCAD for a complex real world product.

The biggest roadblock for FreeCAD right now is that is isn’t that forgiving, you often have to go into a “technical” way of thinking to work around its quirks. The reality is, designers want to design, not become technical experts at navigating FreeCAD.

Even something like creating a thread shouldn’t be as involved as FreeCAD makes it - once you get used to it it’s OK, but in other CAD solutions it’s often as simple as clicking a hole and choosing a thread creation tool…

Steam deck is the only linux device that does AFAIK, via their in-house compositor Gamescope.

It’s on GitHub, but I have a feeling some of the HDR specfics that would be needed for an open source linux implementation could be at the ransom of some standards body, like 4K 120fps support on AMD graphics cards under Linux

That thread could do with one of these: https://en.m.wikipedia.org/wiki/Fire_retardant

Hehehe

FFmpeg (libavcodec) is just one of 22 codecs that VLC is shipped with

https://wiki.videolan.org/Contrib_Status#Codecs

Somewhat already exists, called Fediseer

There are a few other instances that subscribe to lemmy.world’s censures list on there

I picked up Grayjay so I can actually watch early access videos from creators I follow on Patreon. I honestly love how it seamlessly integrates multiple services around creators. Also supports Nebula, and IMO provides a nicer experience compared to the official app.

Personally I still use NewPipe (Tubular fork) for my daily viewing just because I kind of prefer that UI

I just made both gestures an upvote lol

IMO the meme is mocking those who think vehicles are only car-shaped objects, in light of cities imposing restrictions on personal motor vehicle use in built up areas

I doubt it has anything to do with emergency services being restricted to the vehicles shown lol…

DDG has an experimental wikipedia “AI” that pops up near wikipedia results, but theres a button you have to click manually to generate the summary AFAIK