It is really frustrating because the spoiler tags are kind of client dependent I think. I just use the spoiler tag formatting button in Sync, but I know there is some fuckery where it doesn’t work everywhere, or another client uses a different tag.
She/They
It is really frustrating because the spoiler tags are kind of client dependent I think. I just use the spoiler tag formatting button in Sync, but I know there is some fuckery where it doesn’t work everywhere, or another client uses a different tag.
I had to change mine to mac address naming on my proxmox server after the second time the name changed due to a GPU or SSD being added. It was kind of like, so what, if an SSD dies suddenly or I have some issue with a device you are going to rename my fucking nic card again while I am trying to troubleshoot? Absolutely deranged.
I did my first playthrough as Karlach and romanced Gale for shiggles. After he abandoned her at the end. >!You know. Her last night alive before burning to death.!< Yeah. You can bet I left his ass in the portal the next time.
I will have to give it a shot, though I am still pessimistic. I was kind of turned off by the whole Pocket or whatever advertisement thing it wanted to enable. Vivaldi has been fine for me so far.
I at least got one of those little cheap half size ironing boards that I can hide by the dryer. I iron special occasion clothes and that one silk shirt I love to straighten the button strip whatever if it is egregious… Otherwise it sits unused 99.5% of the year.
I know right? I have seen seen vision systems do some impressive things, but they are carefully calibrated to work in a specific way under certain conditions. Some of the ones my company works with get fed CAD in real time so the robot knows what to look for.
Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.
Add a /etc/systemd/network/99-default.link
with the below contents.
# SPDX-License-Identifier: MIT-0
#
# This config file is installed as part of systemd.
# It may be freely copied and edited (following the MIT No Attribution license).
#
# To make local modifications, one of the following methods may be used:
# 1. add a drop-in file that extends this file by creating the
# /etc/systemd/network/99-default.link.d/ directory and creating a
# new .conf file there.
# 2. copy this file into /etc/systemd/network or one of the other paths checked
# by systemd-udevd and edit it there.
# This file should not be edited in place, because it'll be overwritten on upgrades.
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.
ip link
should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
You will need to edit your /etc/network/interfaces
file so the correct card is used.
/etc/network/interfaces
, just in case you mess something up.sudo vim /etc/network/interfaces
(or whatever text editor makes you happy)
It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF
you identified above. source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enxAABBCCDDEEFF inet manual
auto vmbr0
iface vmbr0 inet dhcp
#iface vmbr0 inet static
#address 192.168.5.100/20
#gateway 192.168.0.1
bridge-ports enxAABBCCDDEEFF
bridge-stp off
bridge-fd 0
sudo systemctl restart networking.service
Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.
sudo systemctl status networking.service
will show you if anything went wrong and hopefully show that everything is working correctlyip -br addr show
should show that the interface is up now.lo UNKNOWN 127.0.0.1/8 ::1/128
enxAABBCCDDEEFF UP
vmbr0 UP 192.168.5.100/20
At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.
I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames
Basically, by doing this, your nic cards will be forcibly named using the mac address:
#/etc/systemd/network/99-default.link
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.
I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.
I know right? It sucks having a curved screen with a case as it pushes my thumb in the exact worst spot on the side of the screen. I accidentally do things all the time. I rest my thumb on the case edge to try and avoid it, but if I barely tilt, it touches the oversensitive touchscreen. First world problems.
Same. I had to uninstall due to the battery drain issues. Pixel 6 Pro. Battery life is not something I am willing to compromise on.
Thank you. I admit I don’t use Firefox right now due to issues I ran in to during my trial run earlier this year. Once the battery drain issues are fixed on the Android client I can at least switch back to it on my phone.
My company surprised me last week as we did an install and things didn’t work right in Firefox for the customer. My boss and the team are committed to fixing it and doing better on browser testing. There was not a moment of hesitation on this decision. We of course told them to use Edge, Safari, or Chrome in the meantime, but by no means are we throwing it on the bottom of the “fix” pile. Team is almost done and ready to send to QA. Super proud.
I loved the shit out of that show and that was my immediate thought. I need to “acquire” this show again. The physical copies I had are long gone.
It looks like with multiple power cubes you can break it up. My favorite thing about the switch is the separate joy cons. This is far far far less painful for me to hold than traditional controllers. If this worked on Linux, Mac, PlayStation, and my Steamdeck, I might try it, as long as I could return it if it doesn’t work out.
I struggle with buttons in general. My palms are too small so I can’t wrap my hand around them very well. I have to death grip with my palm or I drop it, but I am constantly shifting around as my fingers can’t reach certain things easily either. The off-axis joysticks on an Xbox controller is a no go as I have to hold the controller rotated a bit which means that up isn’t up. I do much better with PS5 controllers, but still get a lot of pain in my hands if I play too much.
One interesting theory we talked about in mine, at least for Venus statues, is perspective. Stand up, tuck your chin down, and look. If this is the view you using to make a statue, this is how it would look like. Especially if you have breasts and a belly in the way.
No worries! I am on mobile, so I get tired of typing things sometimes. Thank you for going into more detail as all my eloquent points are spent for the day. I sent my favorite Shake Hands With Danger safety video to the software guys yesterday. I hope at least one of them watches it.
Couple things. Fall prevention training. Part of that is knowing how to rescue yourself if you do fall, what to do if your only option is to wait for help, and how to help someone else. There are training sites that will push you off a wall…
Fall arrest systems are meant to save your life when you fall. You don’t hang in the air with them all day. That is a different type of harness. If you fall, you can’t just get up and continue like nothing happened. Fall arrest part of the harness has to be replaced. The rest of the harness has to be fully inspected, if not replaced as well.
Hanging in a harness can kill you as the straps will cut off the circulation in your legs. To prevent that, there are these little pouches on a line that you can deploy from your harness that are basically stirrups. You can put your feet in them and “stand” up while waiting for rescue. If someone is in a harness and unable to rescue themselves, this becomes problematic. Gravity is a bitch and waits for nobody.
I figure it is just a display, but I guess they could go through the effort of shoving people off. Probably safer than the plane. Especially when you are responsible for inspecting your own safety equipment every single time you use it.
Sames. They make sweet monitors.
There are other endings you can get for her. Everything will be ok. Karlach is the best flaming teddy bear ever.